Products_Repair,Restoration & Protective Coatings

Concrete Constructions are generally expected to give trouble free service throughout its intended design life. However these expectations are not realized in many constructions because of structural deficiency, material deterioration, unanticipated over loadings or physical damage and many other causes. Premature material deterioration can arise from a number of causes, the most common being when the construction specifications are violated or when the facility is exposed to harsher service environment than those expected during the planning and design of stages. Physical damage can also arise from fire, explosion – as well as from restraints, both internal and external, against structural movement. Except in extreme cases, most of the structures require restoration to meet its functional requirements by appropriate repair techniques. Some of our range of products would help your structure to regain its lost sheen.
 
 Our Range of Repair & Rehabilitation Products are as follows
MYK Crete MC & MC(M) - MYK Crete MC is a ready to use single component dry powder cementitious material. It is supplied as a pre-blended polymer modified dry powder the addition of recommended water at the site to produce a non shrink free flowing high strength micro concrete. This is specially designed for repair of damaged reinforced concrete. It is suitable for use in wide range of repairs, pavements, ramps etc. Achieve excellent early strengths.
TDS Brochure Case Studies
 
MYK Crete RN - MYK CRETE-RN is a polymer-modified, shrinkage compensated mortar. For interior and exterior use without the corroding substances in it. Good process ability of the flexible, pasty and stable mortar. Can be successfully used for repair work of ruptures and defects in walls and ceilings made of concrete and precast concrete. For the preparation of concave mouldings.
TDS Brochure Case Studies
     
MYK ASOCrete IM - MYK ASO CRETE-IM is used for watertight filling of opened-up cracks and cavities that are to be covered subsequently with AQUAFIN-IC. Alternatively ASOCRET-IM can also be used to form coved fillets.
TDS Brochure Case Studies
 
MYK ASOCrete BS2 - MYK ASOCRET-BS2 is a polymer-modified, shrinkage compensated, premixed mortar for repair and resurfacing works. Can be used for interior and exterior use without corrosive promoting agents. It possess good workability, flexible, pasty and stable mortar.
TDS Brochure Case Studies
     
MYK Bond EBA - MYK Bond EBA is a solvent free epoxy resin, which is supplied as a two pack component in pre-weighed quantities for ready to mix and use. Area’s of Application for all areas where bonding is required for old to new concrete It is ideal for the extensions and structural repairs in structural concrete buildings, bridges, roads, loading bays etc. Used for vertical and horizontal surface where mortar and concrete can be supported by form work for jacketing.
TDS Brochure Case Studies
 
MYK Bond AR43 - MYK bond AR 43 is a modified acrylic based emulsion which is specially designed for use as a bonding agent or cementitious system, It is acrylic emulsion based, used as a cement modifier when applied, provides good bond with masonry/ cement and thus improves the tensile and flexural strength properties of the mortar.
TDS Brochure Case Studies
     
MYK Bond SBR 45 - MYK Bond SBR 45 is modified Styrene Butadiene Rubber emulsion specially designed for use as a bonding agent. It is suitable as an admixture for obtaining waterproof concrete, plasters and mortars it is also suitable for preparation of repair mortars, damaged and spalled concrete. Repair of large cracks.
TDS Brochure Case Studies
 
MYK Fix 10S - MYK Fix 10S is an instant plugging cement for the arrest of temporary leakages and also for the erection of the nipples for injection grouting.
TDS Brochure Case Studies
     
MYK Asolin WS - MYK Asolin WS is a ready to use solvent based colorless water repellent. It is a ready to use material applied on to the Construction material and absorbed by capillarity.
TDS Brochure Case Studies
 
MYK Asolin W2S - MYK Asolin W2S is a water diluted solution of alkali alkyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of active content eight percent in water, MYK Asolin W2S Water Repellent is usually diluted to a concentration of four percent or less before application. The siliconate reacts with carbon dioxide in the air to form an insoluble water resistant treatment within 24 hours.
TDS Brochure Case Studies
     
MYK Coat ZP - MYK Coat ZP is a two component anticorrosion primer for reinforced steel Concrete repairs. It actively resists corrosion within the confines of the repair location. It possess a Permanent protection to the steel structures, has an excellent adhesion to steel.
TDS Brochure Case Studies
 
MYK Rust Converter - MYK Rust Converter is a rust treatment which stabilizes and converts adamantly adhering rust in to a organo-complex compound, resulting in the formation of a nonporous and moisture – repelling coating of good mechanical stability, abrasion resistance, bond strength and excellent anti-corrosive properties. The idea is to convert conserve and retain as much material as possible. This coating is an ideal base for the subsequent protecting coat of paint.


TDS Brochure Case Studies
     
MYK Rust Remover - MYK Rust Converter is a rust treatment which stabilizes and converts adamantly adhering rust in to a organo-complex compound, resulting in the formation of a nonporous and moisture – repelling coating of good mechanical stability, abrasion resistance, bond strength and excellent anti-corrosive properties. The idea is to convert conserve and retain as much material as possible. This coating is an ideal base for the subsequent protecting coat of paint..


TDS Brochure Case Studies
   
 

Quickly and easily calculate your consumption of our products.

© 2009 all rights reserved.
design by cinimage.org